NMN-21

Micromanipulator

High performance free from vibrations in manual operation.

Drift and electromagnetic disturbance are critical problems in patch clamping work. This mechanical micromanipulator was developed specifically for patch clamping: it does not employ a liquid hydraulic system (which is prone to drift caused by temperature changes), has no spring (a common cause of mechanical drifting), nor a motor (which is a source of noise). Its body is designed to absorb vibrations, so that even at high magnifications, problems of vibrations are virtually non-existent. Based on a drum type design, which is highly reputed as a liquid hydraulic method, and with a very stable center of gravity, this model provides exceptionally steady and stable performance. The overall design is compact, so installation requires a minimum of space. With coarse and fine manipulators integrated in the compact body, this model handles a full range of required movements, from moving a microelectrode into the microscope view field to making contact with the cell.

NMN-21

* For attachment to the microscope, a suitable mounting adaptor is required (sold separately).

* The micromanipulator can be mounted directly on the isolation table.

* This model can be firmly fixed to any part of the isolation table with GJ-12 magnetic stand (sold separately).

* AP-13-3 patch clamp headstage holders can be attached on the UST-2 solid universal joint, incorporated in the manipulator.

* Additional water hydraulic manipulator MHW-4 / MHW-4-1 is attachable with P-11 (sold separately). Placing the control unit at hand, the fine single-axis drive can be driven remotely at your fingertips, in the approaching direction.


NMN-21


Micromanipulator

Setting example


Mounting adaptor setting example

ITS + NR-12 + NMN-21 setting example

Achieving low vibration operation

The slider, which is one of the main mechanisms of a micromanipulator, actually consists of two independent sliders - one used inside, the other outside. When the operator touches the control knob, which is connected to one slider, vibrations are caused. To overcome this problem, the control knob is fixed independently, separate from the slider.



NMN-21


Micromanipulator

Specification

Accessories included UST-2 Solid Universal Joint
Fixing Plate
H-13 Electrode Holder
Hex Wrench
Movement range Coarse X15mm, Y15mm, Z15mm
Full rotation of knob approx. 4mm
Fine X6mm, Y6mm, Z6mm
Full rotation of knob: 250µm
Minimum graduation: 1µm
Dimensions/Weight W110 × D170 × H105mm, 930g

NMN-21


Micromanipulator


System Diagram

System Diagram

System Diagram


Black Circle refers to the model itself with standard attachments
White Circle refers to attachable main accessories
Double Circle refers to types of mounting adaptors