MO-97A

Oil Hydraulic Micromanipulator

30mm wide movement range with open type chamber.

This chronic micromanipulator is designed for use with middle sized animals, mainly monkeys. The wide (30mm) movement range and oil hydraulic drive allow electrodes to be inserted, without vibration, into deep areas by remote control. A guide tube (not available with conventional models) can be attached to help conduct the electrode to the required position with great accuracy. Despite the addition of these functions, this model is still light in weight and has a low center of gravity. Since it is attached to the head using the chamber method, detachment is easily performed but there is no concern that some slight movement will detach the electrode involuntarily. The open type chamber allows many driving units to be mounted, or placement of a grid in the center of chamber.

MO-97A

* Motorized type MDO-974A also available.

* Please contact us if you need multiple measurements or the use of a grid.



MO-97A


Oil Hydraulic Micromanipulator

Specification

Accessories included Chamber
Chamber Cap
Stainless Steel Guide Tube (ø0.7 × 60mm)
Threaded Round Bar
Fixing Screws
Spacer
Length of hydraulic tubing 1.5m
Movement range Coarse Z50mm
Fine X13mm, Y18mm
Z30mm
Full rotation of knob: 500µm
Minimum graduation: 2µm
Dimensions/Weight Control unit W65 × D88 × H93mm, 630g
Drive unit W61 × D46 × H130mm, 96g

* Extension oil hydraulic tubing is available upon request. For further information, please contact your local Narishige representative.