[ English / Japanese ]
When using this unit to insert a pipette into the cell, operators can make further movement in the same direction, which minimizes the chance of damaging the cell. This one-axis oil hydraulic manipulator meets that requirement and can also be used as an add-on manipulator. 1mm of movement range per knob rotation is useful for the samples with a few hundred of µm to a few mm under the stereomicroscopes. A compact drive unit is installed on the tip of the ball joint, can be used with any three-dimensional manipulators.
* Holders with 4mm O.D. can be fixed to this model.
* It is available for both side of the setting (right or left) by the rotation mechanism.
DNA injection set (IM-400 + MMO-220C + M-152 + GJ-1 + IP)
* A compressor or cylinder (air, nitrogen, etc.) + regulator are required to use the IM-400.
Full rotation of knob 1mm
Minimum graduation 20µm
|Dimensions/Weight||Control unit||W55 × D45 × H80mm, 140g|
|Drive unit||W45 × D20 × H35mm, 90g|
|Hydraulic tube length||0.9m|
* MMO-220A (Full rotation of knob 250µm) is also available.
refers to the model itself with standard attachments
refers to attachable main accessories
refers to types of mounting adaptors