P-10

Manipulator Attachment


MM-94, MM-94B and oil hydraulic micromanipulator, drive unit of oil hydraulic micromanipulator is obstructed by the connector of the condenser according to the kind of microscope. It is obstructed to control of manipulator and the needle tip does not reach to the center of optical axis. By attaching the P-10 to drive unit of oil hydraulic micromanipulator, the needle tip got to reach to the center of optical axis.

P-10


P-10


Manipulator Attachment


Setting example

Setting example


* When mounting MM-94B and oil hydraulic micromanipulator to Olympus inverted microscope IX83 (when using an electric condenser) or IX73 (when using a spindle observation device), P-10 is required on the left side.

* When mounting MM-94 and oil hydraulic micromanipulator to Nikon inverted microscope (Ti2-E/A/U, Ti-E/U/S, TE2000-E/U/S, TE300, TE200), P-10 is required on both the left and right sides.

* When mounting MMN-1 and oil hydraulic micromanipulator to Nikon Ti-E/U/S, P-10 is required on the left side.

* When the distance between center of optical axis and the needle tip is far, please contact Narishige for more information.


Specifications

Accessories included Hex Wrench
Dimensions/Weight W70 × D22 × H25mm, 43g