MDS-1

New ProductCompliance with CE standards (Legend Symbols)

One-axis Motorized Stereotaxic Micromanipulator

One-axis motorized operation makes careful work easier

One-axis motorized micromanipulator is add-on type for Z-axis direction that is suitable for experiments in rodents. Ideal for precise control that requires careful work in mouse/rat brains, such as implanting GRIN lens, inserting optical fiber and silicon probe for multi-neuron recordings. The drive unit is controlled digitally and remotely that offers speed control and precise control: those operations are impossible to be performed by manual model. Two setting modes are available: entering speed directly or entering distance and time. The range of drive speed is set as 0.1µm/s to 500µm/s. The drive unit accommodates to hold a shaft with 3mm to 8mm O.D.

MDS-1

* Distance between the control unit and drive unit can be extended from original 1.5m(4.9ft) in total to 7m(28.2ft) by MD-DCE-7 (sold separately).

* Palm-sized compact controller MD-OH-1 (sold separately) is available.



MDS-1

One-axis Motorized Stereotaxic Micromanipulator

Specification

Accessories included Connecting bar
Connecting cable (1.5m)
AC power cord (2.5m)
Dedicated screw (for attaching manipulator)
Hex wrench × 2
Spare fuse (inside of fuse holder)
Drive source 5-phase Stepping Motor
Movement range 20mm
Setting range Speed range 0.1µm/s ~ 2,500µm/s (0.1µm/s increment)
Distance range 1µm ~ 20,000µm (1µm increment)
Time range 1s ~ 60min (0.1s increment)
Working voltage AC100V ~ 240V, 50/60Hz
Power consumption 15W
Dimensions/Weight Drive unit W56 × D60 × H122mm, 0.28kg
Control unit W180 × D260 × H95mm, 2.5kg

* The control unit controls one drive unit only; cannot control two or more drive units.