IM-31

Electric Microinjector

Supports various applications from microinjecting cells to puffing a drug solution to stimulate cells.

This device has 2 types of modes - a count mode to set the pressure/time/count and inject a solution and a foot switch mode to set only the pressure and inject a solution while pressing a foot switch - that can be selected in accordance with the experimental application. In addition, incremented settings are also possible when the count is set. Moreover, external control with the same action as the foot switch is possible via the input of TTL signals (negative logic).

IM-31

* A compressor or cylinder (air, nitrogen, etc.) + regulator are required to use this device.

IM-31

(Legend Symbols)

Electric Microinjector

Specification

Accessories included	Output Tube (with a tube connector, HI-7 Injection Holder) Input Hose (with a hose connector^*) AC Power Cord Foot Switch Silicone Rubber Gasket Cleaning Rod
Input pressure	Approx. 50 - 500kPa (= approx. 0.05 - 0.5MPa = approx. 7.25 - 72.5psi)
Injection Pressure	Approx. 1 - 500kPa (= approx. 0.001 - 0.5MPa = approx. 0.145 - 72.5psi)
Balance Pressure	Approx. 1 - 100kPa (= approx. 0.001 - 0.1MPa = approx. 0.145 - 14.5psi)
Time settings	10ms - 99.99s
Count settings	1 - 99
Interval settings	10ms - 99.99s
Power source/Voltage	AC100 (±5%) - AC240 (±5%), 50/60Hz
Power consumption	Approx. 10W
Dimensions/Weight	W240 × D215 × H130mm, 4kg

* The input hose has a tube fitting: "PC6-02" (PISCO). When connecting a regulator a compressor, make appropriate connections in accordance with the tube fitting.

Consumables

Model	Product	Description
HI01PK01	Silicone Rubber Gasket	For 2.5mm (10pcs)

Associated Information

To read PDF files, you need to have the Adobe Reader installed on your computer.
You can download it free of charge from : http://www.adobe.com/products/acrobat/readstep2.html