EG-400

Microgrinder

Mounted microscope to confirm pipette contact with grinding plane.

The microscope is mounted on this grinder, which uses a special motor to minimize irregular movements of the grinding plane: confirmation of contact between the pipette and the grinding plane enables grinding to be performed with greater precision. In addition, this model provides stable performance at all revolution speeds - from low for more precision to high for faster grinding. An easily operable coarse and fine movement coaxial manipulator is equipped for vertical operation of the micropipette, which also enables very precise grinding. A protractor is mounted on the pipette holder fixing section, making it easy to set the required grinding angle, and an adaptor is attached for vertical grinding. New water filling and drainage mechanisms are installed to prevent clogging or the accumulation of shavings, making the apparatus as a whole much easier to use.

EG-400

(Legend Symbols)

Microgrinder

Specification

Accessories included	Adaptor for Vertical Grinding Diamond Wheel Cleaner Dedicated Pipette Holder Allen Wrench Spare Lamp AC Power Cord
Movement range	Up-and-Down Manipulator: Approx. 47mm Microscope: X approx. 7mm, Y30mm, Z approx. 8mm
Magnifications	30× (Eyepiece 10×, Objective Lens 3×)
Glass capillary	ø1mm - ø1.5mm
Power source	AC100 (±5%), 50/60Hz AC120 (±5%), 50/60Hz AC220 (±5%), 50/60Hz AC240 (±5%), 50/60Hz
Power consumption	Approx. 50W
Motor speed	Approx. 50 - 2,000rpm
Dimensions/Weight	W250 × D450 × H400mm, 6.6kg

Consumables

Model	Product
MF-900L3	Lamp

Associated Information

To read PDF files, you need to have the Adobe Reader installed on your computer.
You can download it free of charge from : http://www.adobe.com/products/acrobat/readstep2.html