PN-31

Puller

Puller for producing long, thin, sharp microneedles.

This puller uses a pulling method by which a glass capillary is fine-drawn using electromagnetic force. The long draw-out volume and employment of a strong electromagnetic solenoid enable the production of long, sharp microneedles. The pulling tension can be adjusted over a wide range, from weak tension for gradual pulling of the glass capillary at the beginning to strong tension for the single-stretch draw-out required to make a long, thin microneedle. The heater uses a platinum plate which heats up quickly, so pulling can begin immediately, with no time-lag. Digital values, with the maximum output of the electromagnet and heater represented as 100, are shown on the display, making it easier to mass-produce large quantities of identical microneedles of uniform quality.

PN-31

Puller

Specification

Accessories included	Glass Capillary with filament Spare Heater Heater Reshaping Tool AC Power Cord Allen Wrench
Power source	AC100 (±5%), 50/60Hz AC120 (±5%), 50/60Hz AC220 (±5%), 50/60Hz AC240 (±5%), 50/60Hz
Power consumption	Approx. 250W
Heater level	100 = heater voltage 1V
Magnet level	100 = magnetic voltage 36V
Dimensions/Weight	W300 × D190 × H230mm, 7.7kg

Consumables

Model	Product	Description
PN-3H	Heater for PN-3, PN-30, PN-31	Platinum board 3mm (×3)
PN-30H	Heater for PN-30, PN-31	Platinum board 6mm (×3)